Industrial gas pump Manufacturers china introduces the operation process of the gas pump and how to add lubricating oil
- Categories:Industry News
- Author:
- Origin:
- Time of issue:2021-12-17 15:58
- Views:
(Summary description)When using the air pump, check the tightness of the installation regularly. If the bearing is damaged, it should be replaced in time. The air pump motor must not be exposed to moisture. It must be stored in a dry place. If it is placed on a soil or cement surface, it should be padded with wood. When stored, it must be covered with oil cloth to prevent moisture intrusion.
Industrial gas pump Manufacturers china introduces the operation process of the gas pump and how to add lubricating oil
(Summary description)When using the air pump, check the tightness of the installation regularly. If the bearing is damaged, it should be replaced in time. The air pump motor must not be exposed to moisture. It must be stored in a dry place. If it is placed on a soil or cement surface, it should be padded with wood. When stored, it must be covered with oil cloth to prevent moisture intrusion.
- Categories:Industry News
- Author:
- Origin:
- Time of issue:2021-12-17 15:58
- Views:
Do you know the operation process of the air pump and the method of adding lubricating oil? Today, the editor of Industrial gas pump Manufacturers china will take you to find out.
When using the air pump, check the tightness of the installation regularly. If the bearing is damaged, it should be replaced in time. The air pump motor must not be exposed to moisture. It should be stored in a dry place. If it is placed on a soil or cement surface, it should be raised with wood. It should be covered with oil cloth during storage to prevent moisture intrusion. Regardless of whether it is necessary to avoid the intrusion of dust, water droplets, metal shavings or other sundries during storage or operation, do not cover other objects on the motor when the air pump is running, so as not to hinder heat dissipation and cause the motor to overheat and burn out. When the air pump is in use, pay attention to the ventilation and heating of the motor, and pay attention to the current and voltage not to overload.
If there is any abnormal noise when the motor is running, it should be checked immediately. Do not use the motor in a place with too much steam, dust or with flammable gas. Silicon components should be well ventilated, and the radiator and cover should not be covered by objects that hinder heat dissipation. Silicon components are often cleaned of dust, check the fastening screws of each component to prevent loosening, and regularly check whether there is any disconnection, looseness, etc. inside the control panel. The lubricating oil needs to be replaced when the new air pump is running for 5 hours, and every 500 hours of running thereafter. Check the lubricating oil once a day, and open the drain valve of the air storage barrel to drain the oil and water once a day.
The above is an introduction from the editor of Industrial gas pump Manufacturers china: a brief introduction to the operation process of the air pump and the method of adding lubricating oil.
Scan the QR code to read on your phone
Address: 810-812, 8th floor, Yaju business center, Runzhou District, Zhenjiang City, Jiangsu Province
Tel: 86 511-8521-1589 / 86 139-5140-0642 / 86 137-7535-2215
Fax: 86 511-8522-2589
Email: halley@agreenchem.com
COPYRIGHT © 2020 ZhenJiang Agreen Gas Equipment Co., LTD.