
Knowledge about the structure and composition of the customized Centrifugal Pump price!
- Categories:Industry News
- Author:
- Origin:
- Time of issue:2021-09-06 15:38
- Views:
(Summary description)The basic structure of customized Centrifugal Pump price is composed of six parts: impeller, pump body, pump shaft, bearing, sealing ring and stuffing box.
Knowledge about the structure and composition of the customized Centrifugal Pump price!
(Summary description)The basic structure of customized Centrifugal Pump price is composed of six parts: impeller, pump body, pump shaft, bearing, sealing ring and stuffing box.
- Categories:Industry News
- Author:
- Origin:
- Time of issue:2021-09-06 15:38
- Views:
The basic structure of customized Centrifugal Pump price is composed of six parts: impeller, pump body, pump shaft, bearing, sealing ring and stuffing box. Let's take a look at it briefly!
1. The impeller is the core part of the customized Centrifugal Pump price. It has a high speed and a large output. The blades on the impeller play a major role. The impeller must pass a static balance experiment before assembly. The inner and outer surfaces of the impeller are required to be smooth to reduce the friction loss of the water flow.
2. The pump body is also called the pump housing, which is the main body of the water pump. Play a supporting and fixing role, and connect with the bracket for mounting the bearing.
3. The function of the pump shaft is to connect the motor with the coupling, and transmit the torque of the motor to the impeller, so it is the main component that transmits mechanical energy.
4. The sliding bearings of customized Centrifugal Pump price use transparent oil as lubricant, and add oil to the oil level line. Too much oil will seep out along the pump shaft, and too little bearing will overheat and burn out causing accidents! During the operation of the pump, the temperature of the bearing is up to 85°C, and it generally runs around 60°C.
5. The sealing ring is also called the leakage reducing ring.
6. The stuffing box of customized Centrifugal Pump price is mainly composed of packing, water seal ring, packing tube, packing gland and water seal pipe. The function of the stuffing box is mainly to close the gap between the pump casing and the pump shaft, and prevent the water flow in the pump from flowing outside and the outside air from entering the pump. Always maintain the vacuum in the pump! When the pump shaft and the packing friction generate heat, the water seal pipes the water to the water seal ring to cool the packing! Maintain the normal operation of the pump. Therefore, special attention should be paid to the inspection of the stuffing box during the itinerant inspection of the operation of the pump.
Scan the QR code to read on your phone

Address: 810-812, 8th floor, Yaju business center, Runzhou District, Zhenjiang City, Jiangsu Province
Tel: 86 511-8521-1589 / 86 139-5140-0642 / 86 137-7535-2215
Fax: 86 511-8522-2589
Email: halley@agreenchem.com






COPYRIGHT © 2020 ZhenJiang Agreen Gas Equipment Co., LTD.