Quality Ball Valves Wholesale Price The opening and closing parts are driven by the valve stem and rotate around the quality Ball Valves Wholesale Price axis. It can also be used for fluid adjustment and control. Among them, the hard-seal V-shaped quality Ball Valves Wholesale Price has a strong shear force between the V-shaped ball core and the metal valve seat of the hard alloy surfacing. It is especially suitable for fiber-containing, Medium such as small solid particles. So how much do you know about its hard seal installation knowledge? Follow the editor of L-CNG/ LNG Skid Mounted to have a simple understanding!
1. Remove the protective covers on both sides of the flange, and rinse and clean with the valve fully opened.
2. Before installation, the whole machine should be tested according to the specified signal (electricity or gas) (to prevent the vibration caused by transportation from affecting the performance), and then it can be installed online (wiring according to the wiring diagram of the electric actuator).
3. Before preparing to connect with the pipeline, flush and remove the remaining impurities in the pipeline (these substances may damage the valve seat and ball).
4. During installation, please do not use the actuator part of the valve as a lifting point to avoid damage to the actuator and accessories.
5. This type of valve should be installed in the horizontal or vertical direction of the pipeline.
6. The pipeline near the installation point should not be drooping or bear external force. Pipe supports or supports can be used to eliminate pipeline deviation.
7. After connecting with the pipeline, please cross-tighten the flange connecting bolts with the specified torque.
The above is the introduction of L-CNG/ LNG Skid Mounted editor: about the hard seal installation knowledge of quality Ball Valves Wholesale Price.